Candide by Voltaire Essay Example for Free

Candide by Voltaire Essay Through Candide’s perplexing adventures and enlightening encounters, Voltaire illuminates the numerous diverse cultures of which Europeans consider themselves superior. Yet rather than supporting the foreign practices of cannibalism, bestiality, and the abolishment of priests, Voltaire is ridiculing the Europeans’ own methods of torture in an abusive social hierarchy. Therefore, while freedom of expression and a consensus of the majority constitute faucets of good behavior, the European practice of elitist rule and inequitable punishments is revealed as unjust. This criticism suggests the need for reform by deriving authority from somewhere other than the traditional roles of the royalty, clergy, and nobility, a rather radical move at the time. Voltaire at first reveals the fault of Europeans through his description of the savage land of Oreillon. Upon their dissent from Paraguay, Candide and Cacambo come across two women, completely nude, who cry out and â€Å"spryly† run away from two monkeys who snap â€Å"at their buttocks† (73). Instantly sympathetic, Candide shoots his musket and kills the monkeys, thinking that he has redeemed himself from earlier sins by saving these distressed women. However, to his surprise he discovers that he has just killed the ladies’ lovers. Without questioning the practices of this foreign society, Candide reacts based on his own perceptions of right and wrong. His actions reflect the naivety of Europeans concerning what is thought to be normal based on their own â€Å"superior† culture. As punishment for Candide’s rash actions, the Oreillons attempt to roast the travelers over a spit to eat, justifying this through the proclamations that Candide and Cacambo are Jesuits and thus deserve to die. This behavior is explained by Cacambo as being â€Å"appropriate† because â€Å"if we Europeans do not exercise our right to eat others, it is because we have other ingredients for a good meal† (pg. 74). He recognizes that each society contains its own equally valid practices which cannot be altered or condemned by those who think they are predominant. In addition, Voltaire is not justifying that bestiality and cannibalism constitute a righteous society, but rather satirically commenting on the Europeans own practices, for it would be hypocritical to condemn these practices without evaluating whether the European’s own forms of punishment are just. As the innocent Candide ventures to Eldorado, he is once again introduced to a land unlike that found in contemporary Europe. Upon their arrival, the travelers bewilderingly walk upon pavement made up of rubies, emeralds, and gold and rapture in the delights of a free feast at a common inn. The generous, humble citizens then guide them to an old man and, later, even the approachable king, in order to answer their many questions. Through these communicators they come to realize that the most striking aspects of the village do not constitute its physical features, but rather its ideology. They are told that all men are free, and thus there is no need for the establishment of courts, trials, or prisons. While Candide is quite baffled by these assertions which completely contrast the structured social organization of Europe, he is even more confused by the lack of priests or an enforced religion, upon which he exclaims, â€Å"What! You have no monks who lecture, debate, govern, conspire, and burn people who don’t agree with them?† (79). These seemingly sarcastic remark is a reflection of the binary thinking in which the Europeans have taught their citizens to believe. Candide had always considered the church as an institution which interjects in every aspect of life and constantly ridicules and punishes others while denying the fact that there are other practices and religions besides the order of the church and Catholicism. Voltaire is not suggesting the elimination of priests, which would be a radical idea at the time, but is rather demonstrating a deeper criticism of Europeans who assume that they are superior and must punish all those who defy this idea. Although Oreillon and El Dorado are societies completely unlike that of the Europeans in law and culture, they are seen as portraying decent human behavior because they allow their citizens to express free will and they derive authority from the consent of the masses. For instance, in Oreillon, women are allowed to mate with whomever they please without judgement or persecution from others. This freedom of expression illustrates that the culture seeks to facilitate the happiness of its people. Additionally, when the two monkeys are murdered by Candide, the leaders instantly capture and attempt to punish the travelers, reflecting the society’s dedication to protect its citizens from harm and condemn those who impinge on basic freedoms. While this culture may seem bizarre compared to more civilized nations, the fact that it derives its authority from the people illustrates that bestiality and cannibalism are enforced as appropriate human behaviors so long as there is a general consensus. Similarly, good behavior does not necessarily need to be derived from praise towards the king or daily sacrifices to a church, as portrayed in Eldorado. Unlike in Europe, the king is humble, approachable and genuinely concerned with the welfare of his citizens. For example, the feast the travelers consume at the inn is free because the state is said to assist business, thus revealing that the government is willing to contribute to the success of its people despite their class or wealth. Therefore, despite their practices, these societies emulate good behavior. However, Voltaire forms a critic of the Europeans due to the unjust practices in which they derive and maintain authority. In Candide’s hometown of Westphalia, for example, the naive Candide is exiled from the castle of the Thunder-ten-tronckh because he kissed the Baron’s daughter, Cunegonde. He was unfairly punished because he stepped out of the social hierarchy to which he was born, while Cunegonde was not disciplined for her actions due to her rank. Similarly, in places like Paris, the elites haughtily criticize their fellow man’s creations and do not hesitate to manipulate and greedily conspire against others. When Candide is led into a ploy by the despicable Abbe and arrested even though he had not committed any crimes, he is able to buy his freedom with three diamonds. The officer then exclaims, â€Å"Ah sire, even if you committed every crime imaginable, you’re still the best man in the world† (97). One’s fate depends on the inconsiderate word of the elite, one’s wealth, and the act of bribery. Since Candide had money, he was able to secure his freedom while the majority of peasants who are near penniless would have to suffer. These scenarios represent the unjust rule of the elites over the consensus of the majority. While Voltaire formulates the components of good behavior based on the legitimacy the authority derives from its citizens, he also constitutes bad behavior as punishment without just cause. For instance, when Candide and Martin arrive in Portsmouth, they view the execution of a British Admiral. The Admiral’s crime was explained in that he had stayed too far from the French enemy and that his death would encourage others to fight more fervently during war. This nonsensical behavior represents the paradox of European punishments which reduce war heros to criminals. Another such scene is presented when Candide and Pangloss reach the city of Lisbon in which a haphazard earthquake kills thirty thousand people. Faculty of a university decide that, in order to prevent another earthquake, they must â€Å"roast several persons over a slow fire They had therefore seized a man from the Basque province who had been convicted of marrying the godmother of his godchild, and two Portuguese men, who when eating a chicken, had removed the bacon seasoning† (52-53). As a manner of electing their sacrifices, they choose those who had committed even questionable offenses, though even those forms of misconduct can be viewed as unsubstantial enough to deserve punishment, much less death. While it is firstly completely unreasonable to attribute a natural phenomenon to personal actions, Voltaire goes so far as to satirically illustrate that this is a commonsense European belief, for both offenses appear inconsequential to the victims’ punishment. Meanwhile, most Europeans would be disgusted with the culture of the Oreillons who engage in cannibalism after enacting a punishment. However, Candide’s death penalty after murdering two of its citizens is a much more equitable offense in terms of its punishment than removing bacon seasoning from chicken, such as in Europe. Furthermore, once a body has been burnt, it seems inconsequential whether it is eaten or not. Voltaire is thus able to portray the irony as well as the unjust nature of European punishments as a bad behavior of society. The figures of the time who would be most notably perturbed by Voltaire’s suggestions constitute the royalty, the nobility, and the clergy. Firstly, for centuries the royalty had uncontestedly derived authority through lineage and from claims to divine right. Candide’s embrace with the King of Eldorado would probably be perceived as strange because the royalty was considered far above the common people in class, stature, and rights, and thus did not need the consent of its citizens to govern. Thus, the monarchy would be opposed to Voltaire’s ideas because they undermine his authority. This is reflected in eighteenth century Europe when the National Assembly made a radical move by sending Louis XVI to the guillotine as a symbol of the growing dissatisfaction of the peasants and workers. Secondly, the nobility consisted of a small number of elites who mainly derived their elevated status from patronage. Voltaire’s view of this social class, at least in Paris, is illustrated in the abode of Marquise de Parolignac, in which these morose intellectuals portray that their sole interests are to spread slander, hypocritically belittle art, and greedily take advantage of Candide’s treasures. Similarly to the monarchy, Voltaire’s proposal that society’s values and laws should be supported by the consensus of the masses was a scandalous assertion because it would undermine the power of the elites and force them to surrender their privilege. Finally, the clergy’s word penetrated all aspects of life in eighteenth century Europe while Religious Orthodoxy formed local allegiances and bound communities together by preaching sacred traditions. However, it can also be said that the institutions of the church hypocritically valued their own self-preservation over educating the masses. Therefore, these religious authorities would not consent in being forced to adhere to stricter laws by having to give proper, legitimate reasons as a means to punish nonbelievers or delinquents of the church. Despite these opponents, Voltaire suggests a need for reform by deriving authority from somewhere other than the norm. Although European society appears far more advanced than that of the savages and more structured than Eldorado, that does not necessarily determine that its laws and people are superior. In fact, Voltaire constitutes good behavior in a society as something that has been consented upon by its people, while bad behavior derives from unjust punishment and the dangerous rule of elites. Voltaire thus forms a critic of Europeans through comparisons to these foreign lands and furthermore questions whether a reformation of authority is a necessary means to benefit society. Source Voltaire. Candide. Boston: Bedford/St. Martin’s, 1999.

Purpose Of Computer Components Computer Science Essay

Purpose Of Computer Components Computer Science Essay There are many peripherals inside computer base, which process instruction via buses/wires to other hardware/software. Those are hardwares that works together and shows output/input. Such as Motherboard, Monitor, Operating system, Keyboard, Mouse, Speakers, CPU (Central Processing Unit), Hard Disk (storage devices) and Graphic card /video card. My aim is to describe about hardware, role of hardware and specification. Nowadays, technology growing very fast, even mobile, PDA works as computer, without having hardware like computer. In this report, the user will get more knowledge about hardware. The CPU is main device to maintain and provides order to RAM. If we go to deep then, the CPU has for factor of execution, such as PC (program controller), CU (control unit), and ALU (arithmetic logic unit) and finally is storage (registers). But clock is important device which maintain frequency (voltage) within computer system. A RAM is short term memory hardware which gets order from CPU and sends it hardware to run and launch. A RAM have priority to transmit data to anywhere within system. Secondary memory is non volatile because it holds data for permanent and CPU is not direct contacting with memory. A magnetic disk and optical device is secondary device because you use that device anywhere and any location by modelled by USB system. A supportive device and input/output devices also important to support other device for improve efficiency, performance and execution. Process of computer system Other I/O e.g. USB, ETHERNET and other components Diagram (1.1) [1] Control CLOCK KEYBOARD CPU, CATCH SRAM/AVL, general register MAIN MEMORY HARD DISK Data buses, 64 wire Address bus 16, 32, 64 serial wires Control buses: lot of different signal RW line e.g. clock signal Diagram 1.1 shows a CHIP clock is manages and handles all activity of hardware and software. It controls the traffic (frequency/voltage/bandwidth) within internal buses that make sore every components of computer system should get right amount of duty (instruction). When user gives command to computer system, than a CPU (central processor unit) gets instructions, that moment a clock chip controller performs to processor should get reliability. After, a processor passes information within second to Memory RAM. A memory ram is short term storage devices which executes information from CUP and shows output to user. A RAM sends instruction to other internal devices to perform. After that, a software/ or hardware start functioning. I would like to describe about hardware of computer system. [3] CPU (central processing unit) is a main primary hardware of computer system which is carryout the commands from software and categorise task in sequential order. A role of CPU is to perform programs that stored in the main memory via fetching their orders. It is responsible of fetching commands from the memory and formative their type. It has four major models which are Arithmetic logic unit (ALU), Control unit, registers, and Clock. A CUP calculates Arithmetic, assignment statement, Boolean statement and logical statements which are performed by CUP. It also holds high-speed memory to store output and some control statements. Central processing unit (CPUs) [2] This memory is registered with functions; the most important program is program counter (PC), which indicates to next command to be executed. And also there is another register which contains instruction of current processing task. A CPU needed a motherboard and RAM to transmit instructions and Ventilation sink to cool down the CPUs internal materials (buses). [2] CPU processing cycle: it is execution process where the instructions processed by sequentially within CPU from memory. A cycle mean it keep reaping and executing instructions until a task is finished or reached. Primary memory and secondary memory RAM (random access memory) [5] before in 2003, RAM shared 512 memory that provided by system but nowadays RAM memory reach up to 1 or 4 GB, when RAM is not capable to transmit the data flow within its ability, then the user might have install another RAM. So the system can run faster and task will be monitored by operating system. As we know that memory controls the signal traffic, but upgrading latest RAM, improves the traffic signal of data/task, works faster than before and also you will get quick response from computer system. Basically, memory is measured by increase of bits and bytes. [4] It stores data that can be access sequentially. If the data is not reached or not found at present position, than each memory bytes checked until get full information or found data. A SAM (serial access memory) is a partition of RAM that helps to transfer (buffer) data; organise data in order and then stores. A memory is integrated circuit (IC), which developed by 100 thousands of transistors and capacitors. Most basic RAM circuit is DRAM (dynamic memory random access memory). A capacitors and transistors produce a memory cell, which represents a signal bit of data (1 or 0). A capacitors is contains one signal digit at one time (voltage) and transistor works as switch, so it lets the control circuitry on the memory circuitry reads that binary words that capacitors contains and modify its position. Memories consist of a cells and each cell organised by address. A CPU (central processing unit) interact with main memory by sending signals to two registers of memory, which are memory address register (MAR.) and memory buffer register (MBR). When a CPU wants instruction from memory, it sends address of instruction to MAR and send digital frequency to memory the memory. After that the memory stats functioning and insert that instruction to MBR, where the CPU can access that frequency. The CPU set the address into MAR and cells are stored in the MBR. Finally, the memory is starts working and store set of instruction. A memory needs slots to locate into motherboard. The user can input two memory chipset at one time. There are two type of chipset which are DDR and SDRAM, its sends instruction twice at same time. [5] A program only launch from main memory and OS (operating system) holds instruction until needed. Secondary memory As I defined differences of primary memory; a CPU can be directly access it but in secondary memory, CPU does not access instruction or data directly. Normally, secondary memory is cheaper, longer and has larger capacity. Also it hold large amount of data. Hard drive Today, the hard drive is available in various formats, such in larger capacity. It used to hold up permanent data such as operating system, files and application. A disk is made from metal or made from special glass or aluminium or alloy material, which is LP phonograph used to record. The user can save large amount of data for permanent. A memory does not disappear when computer is shutdown. It holds memory until user needs. A hard disk is holds bytes and bit and that converted into file/folder. However, when program is running that moment the hard disk retrieves instructions and sends data to CPU at the one time. Commonly, the hard drive is transmitting data between 5 to 40 Mbps. When a CPU request for data from hard drive, that time the data transmitted to CPU between 10- 20 milliseconds. [15] Information is printed on a patterns and tracks. Track means concentric circles and patterns are in pie shaped. The disk has hundreds of tracks per shell. There are data reader head that move to closer or move back to central. The head is long enough to read or write data from whole CD, when its spinning. A hard drive have many disk installed vertically by inch apart and every disk patterns have a head that movies together and executes data at same time. Each disk drive has installed with disk controller. The controller transmits data between main memory and disk. Once a data start executed, the memory set the address for that data and keep information about where to go? And keep address of data that executed from. A disk have many sectors are divided by tracks, basically, 10 to 100 sectors per track. [15] Disk storage and USB storage: A disk is third memory storage device because the user can take anywhere. A DVD drive is rewritable compact disk knowledge. A user can save data from hard drive or load the data into it for purposes. It is burns various type of disk in different formation such as music, video and file. There also external DVD drives that can be connect via wire. A DVD drive data read rate is 48* (CD) and 16* (DVD); also writing rate is 48* (CD), 6-8 * (DVD) and 12* (DVD RAM). A user need a disk drive that record data into disk, but in DVD drive a laser reads data from surface of disk and then transmitted into computer system. A purpose of the Disk is to backup data and for protection. [6] A USB (universal serial bus) devices are very easy to use and a device created for universal use, because a small chipset, it can store large data. It usually works in any computer or other device and range of components can be connected easily. A USB 1.1 has ability to transfer maximum rate of1.5 12mbps. [6][7] Input and output devices Scanner/printer: a scanner is important device to convert paper base information into digital information and printer is printing digital information into paper. Basically, the user gives instruction to printer to print data but computer recognises its components by driver. Most common function of scanner is CCD arrays. It collects small lights -responsive diodes which change light into digital. However, an inkjet printer uses small droplets of ink to create image. The dots are very small and tiny between 10-3 dots per millimetre and positioned to exact location. [8] Keyboard, Mouse A keyboard is very common hardware to input/guide instruction and for manage computer system. It can connect via wire or USB ports. It has many characters to interact with PC, such as numbers, symbols and alphabets. It has switches to translate the person who type character into bytes so computer can understand. Most of keyboards have 80- 110 keys including functional key, control key, numeric pad and typing keys. Inside the keyboard, it has own circuitry and processor to take instruction to CPU. [9] A mouse is best model to interact with computer system without typing in; control censor movement and have ability to point on the object on computer monitor. It gives you easy accessibility to perform function of computer system. A mouse (device) installed with either sensor or roll ball to create/navigate motion. There are different mouse developed which is optical, touchpad and roll ball. An optical mouse has track sensor (CMOS: complimentary metal-oxide semiconductor) that scan surface and does not need a pads to support. The CMOS sensor transmits every collected image to digital signal processor (DSP) for analysis. Basically, a DSP measured the collection of data that how patterns are moving from previous image. [10] Support devices Motherboard Motherboard is main part of the computer and it handles communications between devices via transmitting electromagnetic power. A motherboard has many supports components to hardware, such lithium betray, DDR memory slots, 12v ATX power connector, AGP slots, chipsets, USB headers, PCI slots, CPU, HDD headers, IEEE (network) etc. Each function of motherboard has own responsibility to support internal hardware. There are many comprised individual circuit traces that is in collection of form of buses. Traces are skinny conductors or circuits on motherboard that works combine for a specific aim. It transmits electrical frequency (signals) from HDD, CPU and RAM then to other devices. A motherboard Bus is work with internal chipset/circuit to move exist data within motherboard. A motherboard can be process 32/64 bits, and transmit data up to 800-2000 MHz Major functions of the motherboard is chipset which is north and Southbridge; usually, it behave as traffic signals on the motherboard to measure high and low voltage communication to reduce data crashes. A Northbridge manages high speed communication between CPU, Ram and supportive hardware but Southbridge manages slow speed of communication based device between ports and slots, such as USB, IDE, parallels, serial, keyboard etc. [11] Graphic card A graphic card is provides supportive abilities for media bases software or hardware to work and run properly. Specially, an Intel chipset (G965, GM965, G33 etc) developed to support games animation, high resolution, and GUI (graphical user interface). A graphic card is allowed to experienced high definition GUI without needed for add-in components. Most of the graphic card is installed within motherboards AGP slot. A role of GPU (graphic processing unit) is to draw entities (geometric and mathematic calculation) that moving fast image that observe the monitor and its high level of language produce for graphic interface. To target that real time animation, the GPU must perform much floating-point operation per second. A GPU measured a shape and type of data and passes to execute function at GPU [12]. A GPU modelled by vector processing modelled, to support high application and support their functionally and GPU parallel architecture allows to perform faster, boosting rate of executi on. A manufacture developed much kind of GPU and to support; the user needs to install drivers. Currently, there are two type of GPU interface, which is OpenGL and DirectX [ref]. Because, those are interfaces developed for programming graphic operations. Figure 1.4[12] Reason I wrote about GPU because it has big responsibility give graph card to support other elements. An image we see on the monitor, it is tiny dots of pixels and that pixels are common regulation setting; each block of cells has thousands of pixels. Graphic card is translator binary data from CPU and convert into image. Basic principal of CPU is to transmit instruction that provided by software and graphic card decides how much pixels have to use to describe image. After that it transmits information to the monitor through cables. It also contains output/input technology, such as memory, processor, heat sink, motherboard connector. [13] Conclusion To conclude all about computer hardware, including CPU, memory and supportive device that work together. My aim is to describe about ability, specification and role of hardware. When the user is interact with computer system by mouse or keyboarded. The CPU gets information and converted into instruction. Basically, CPU produces order for components via using different device, such as RAM, ROM. My decision is that, by upgrading hardware, the computer system may work fast, reliable and accessibility will improve. Normally, Secondary memory provides space to hardware/software to launch and primary memory directly communicates with hardware. There are various memory which helping RAM to work faster which is registers, catch memory. The registers are addresses the executed instruction and processed instructions. A CPU does not communicate with secondary storage device, because the data is keeps permanents and can only use when needed. Its also known as magnetic disk, which is a data store in tracks and addressed blocks but when computer is shutdown, the data cannot erase. This is advantage of having secondary memory in computer system. A disk is also important to back up data, so user can use in different computer. Recently, optic storages are growing and making place in market, because it can be use anywhere and more protected. However, the user can re-write on disk or optic storage device. A scanner scans paper based information and converted into image, but that image, a printer prints it. The advantage of having scanner is to keep data in digital way and when it needed data will printed. A purpose of mouse is to interact and select object from monitor, so without inputting, a system going to run much easier. But a keyboard has many symbolic buttons and each buttons are address by bytes which keyboard processor convert into binary and transmitted to CPU. A motherboard developed by many functions to support and provide communication channel to hardwares which is connected to. Basically, it transmits an electric power via system buses and Northbridge manages high speed of CPU, RAM and ROM but Southbridge manages high speed of external devices, such as secondary and optic memory. A graphic card has important role as well to provide clear and sufficient image on the monitor. GPU is measures complex geometric shape and do mathematical calculation to make GUI (graphical int erface system) system.

Civil Constitution of the Clergy

Civil Constitution of the Clergy The Impact on the Civil Constitution of the Clergy, 1790 The French government completed its subordination of the Roman Catholic Church in France on July 12, 1790. The National Assembly passed the Civil Constitution of the Clergy. This was a culmination of events of the Catholic Church meeting opposition from the French government. The Catholic Church already faced the abolishment of tithes as well as nationalization of all property they used for revenue in 1789. Leading up to the actual Civil Constitution, monastic vows were forbidden. Only ecclesiastical orders that dealt with children and nursing the sick were kept intact, all others were dissolved. Motivations for these changes to the French Catholic Church are questionable. They could have been sparked by the French governments impending bankruptcy, or the tithes systems abuse. The Civil Constitution of the Clergy was a dramatic reorganization of the clergy. The number of bishops was drastically decreased from one hundred and thirty five to eighty three. Each of the new bishops and priests were required to be elected locally by their constituents, removing the popes authority over the clergys appointment. Under the Civil Constitution, the bishops and priests had to swear an oath of loyalty to the new order and the Constitution. Title II, Article XXII of the Civil Constitution states, â€Å"The bishop elect shall take a solemn oath in the presence of the municipal officers, of the people, and of the clergy to guard with care the faithful of his diocese who are confided to him, to be loyal to the nation, the law, and the king, and to support with all his power the constitution decreed by the National Assembly and accepted by the King†[1]. This swearing of the oath caused great debate. Pope Pius VI refused to accept any provisions of the Civil Constitution. Louis XVI sent numerous letters to the pope complaining that he had to publicly accept the Civil Constitution. He suggested that the Pope Pius VI appease the National Assembly and accept a few articles. On December 26, 1790, Louis XVI granted his public assent despite the Popes acceptance because of pressure from the National Assembly. The next month, administrations of the oath began, drastically diminishing the numbers of the clergy. Half of the clergy and only seven of the preexisting bishops swore an oath of loyalty. A schism was created within the Catholic Church as Pope Pius VI denounced the Civil Constitution. One side of the split took the oath and was known as the constitutional clergy. Those that agreed with the Popes denouncement became non jurors or refractory priests; they faced dismissal, deportation, and death for their actions. To understand more upon the impact of the Civil Constitution of the Clergy on the French Catholic Church one examined a few books on the subject. The first was published in 1986 by the Princeton University Press. Timothy Tackett wrote Religion, Revolution, and Regional Culture in Eighteenth-Century France: The Ecclesiastical Oath of 1791, a four hundred and twenty five page book. Tackett is an American historian specializing in the French Revolution; he has published a few books on different aspects of religion in the French Revolution. This particular book focuses on explaining the geography of oath taking in France, which regions were most likely to take the oath and why. In Timothy Tacketts Religion, and Regional Culture in Eighteenth-Century France: The Ecclesiastical Oath of 1791, he makes convincing arguments that many have come to respect and others that have yet to be confirmed. Tackett is able to accomplish this through his use of vast archival and printed sources. In arguing his thesis, geography of oath taking, he argues that the clergys ideology, their beliefs, denominational influences, and constituency influences, is the most important deciding factor. Tackett finds that reactions to the oath usually varied depending on the region. In an area where protestant enclaves were present, it was more than likely that the local clergy would be opposed to the oath. On the other hand, in areas where there was a presence of local Jansenism or the Cures opposed Episcopal power, he found that the local clergy tended to take the oath. Tackett understands that no argument is a strong argument without acknowledgement of the opposition. With that said, it was only right for him to mention other possible influences on the reactions to the oath. Other minor influences on the regional reactions to the oath could have also been attitudes towards the Revolution, age and social origin of the bishops. According to Tackett social origin is defined as cultural and political distance from the center of France. When discussing the importance of the Oath, Tackett says, â€Å"[it is] one of those very particular kinds of historically happenings, with the potential for sharply jolting the whole historical landscape†[2]. He did not believe that the Oath of 1791 was the only shaping factor of Frances rich history. In addition to the oath, he also credits the Churchs role in society as well as the relationship between Church and State to be the reason for the laicite seen in modern day France. Tackett comes to this conclusion by the uncanny coincidence between the regions reactions to the oath and religious practices divided by areas. Timothy Tacketts book was a helpful source in the area of clear analysis of the factors that played a role in the reactions to the Oath of 1791. Through this analytical work, the reader is able to understand the impact of the oath and ultimately how it shaped France. While helpful in some areas, Tacketts book is lacking in synthesizing his analysis with a clear conclusion. This leaves issues of the development of Frances religious history unanswered. Some of the conclusions drawn were not fully developed and some times unclear, which gives the reader the idea that he may not have fully understood the entire concept or maybe his sources were lacking in these very areas. Tackett builds up his arguments to support his thesis on the geography of oath taking, but loses momentum. The next book studied was published in 1996 by Yale University Press. The Religious Origins of the French Revolution: From Calvin to the Civil Constitution, 1560-1791 is a three hundred and ninety page book written by Dale Van Kley. Van Kley is an American historian who is best known for this prize-wining book. His work has focused on the contributions that Augustinian theology made to the Enlightenment and the French Revolution. He is a professor of History at Ohio State University. In the Religious Origins, Van Kley explores the diverse religious strands of Jansenism that influence political events up to the revolution, claiming that the efforts to dechristianize the French state and citizens had long-term religious origins. Van Kley shows that French royal absolutism was a product and then a casualty of religious conflict using a wealth of primary sources. He studies a great number of individual bishops and clergy, their views, and sympathies. The relevant religious conflict that he discusses is the Jansenism- related conflicts in the eighteenth century that helped to â€Å"desacralize† the monarchy along with the French Catholic clergy. This conflict was a direct contribution to the revolution because it led to parties that were of a political and religious nature. The Patriot party was a successor to the Jansenist party. The rhetoric of such parties affected the content of the revolutionary political culture. The Civil Constitution â€Å"eliminat[ed] the clergy itself as a visibly independent corps, this ideological combination hastened the interiorization of religion and the states monopolization of public functions, a tendency long evident in judicial Jansenism itself†[3]. Before the c lergy had a role in public functions, but Jansenism supported this separation of religion into the private sphere and government control of the public sphere that was made by the Civil Constitution. Van Kley, indebts the revolutionary political culture to the varieties of French Catholicism. It was strongly influenced by the struggle between rival notions of the good society. The ultra-montanist Catholicism of the Jesuits supported the sacral monarchy. However, the Jansenists favored a contractual political order. â€Å"Jansenists could have congratulated themselves that the Civil Constitution enforced Episcopal residence, instituted clerical elections, nearly nullified papal influence†¦ banished arbitrary government†[4]. The Jansenists defense of a contractual political order over a sacral monarchy seems to have led to these provisions of the Civil Constitution. This source was less helpful in exploring the topic, because it was narrowly focused. Van Kleys attitude was obviously prejudiced against the Jesuits, as he portrayed them as the leaders of sacral monarchy and the Jansenist oppression. He describes Jansenist opposition and criticism of Catholicism. His interpretation of religions influence on the French revolution was extremely limited; however, he should be praised for shedding light on the importance of religion in the French revolution. He adds a major strand to the debate on the origins of the French Revolution. Despite, its innovative addition, Van Kley limits his focus to the Jansenists role as the chief force behind opposition the French monarchy. He states, â€Å"Some if not all of the content of the Civil Constitution was the culmination of a century of Jansenist efforts at ecclesiastical reform†[5]. Jansenist position seems to be of exaggerated importance. He also seems to leave out the Catholic features of Jansenism , and more likens them to Calvinists. He demonstrates how Jansenism inspired a radical Calvinist break with Catholic discourse and worship. This book was a tough reading, with much material through primary sources. However, its focus on Jansenism serves more as giving another side to the traditional story rather than convincing many of religions influence in the French Revolution. Nigel Aston wrote four hundred and thirty five pages on the Religion and Revolution in France, 1780 1804. Aston is Reader in History at the University of Leicester. This book is a comprehensive survey of the religious history of France from the eve of the Revolution through the early years of the nineteenth century. Using a vast array of secondary materials and printed sources, Aston creates a comprehensive survey of the religious history of France. He begins his text with discussing the special privileges of the Catholic clergy as well as the principles of Gallicanism, Jansenism, and Richerism, the strains of Catholicism that would fuel the revolt of the lower clergy against the bishops of the Estates General. There were deep social and economic divisions within the clergy. Aston also notes the religious diversity in France. He writes, Geography is crucial[6] when discussing the variations in clerical density, religious fervor, and ecclesiastical revenues from province to province. Aston also includes information on the treatment alongside male clergy of women in religious orders. His second chapter analyzes the diverse beliefs and practices of the clergy and laity. He felt the French laity remained overwhelmingly attached to the Catholic faith and practice†[7]. He is rejecting the idea t hat the French populace showed signs of secularization and questions the thesis of a â€Å"desacralization† of the monarchy. Aston also includes a chapter on other denominations in the late Old Regime. The second part of his book focuses on the relationship between religion and Revolution, exclusively on Catholicism and builds on his earlier work. He blames the leaders of the Constituent Assembly for the terrible religious divisions which marked the Revolutionary period. Events would have taken a more moderate course and scores of thousands of lives would have been saved[8]if the oath was not required. Also, if the leaders would have permitted the convocation of a National Council of the French clergy to ratify the revolutionary reorganization a less radical course would have been taken. Instead the Civil Constitution of the Clergy led to a break in the church by forcing clergy to choose between the church and the state. Faced with what was crudely reduced to a stark choice between religion and revolution, half the adult population rejected revolution[9]. The last relevant section of the book focuses on the aftermath of the Civil Constitution and the official policy of dechristianization. Most native French had no choice but to put up with the changes imposed by urban-based politicians; the non compliant risked death by their determination not to abandon their Christian faith[10]. Other chapters in this section focused on how anticlericalism triggered European opposition to the Revolution more than the decision to kill Louis XVI. He also explored the Constitutional Church and Catholic opponents of the Revolution. Aston was a helpful source as it seemed to cover all aspects of religion and the French Revolution. Its broad coverage treated Protestants and Jews alongside the Catholics. This is unique as the term religion when regarding the revolution is conflated with Catholicism in most studies. This book was very readable striking a balance between synthesis and detail. However, some of Astons conclusions lack strength because opposing stances were omitted. For instance, his sole blame on the leaders of the Assembly for the schism created by the Civil Constitution underestimates the impact of Pope Pius VI. The pope was uncompromising and rejected the Civil Constitution as well as the ideals of the revolution. When researching this topic, I would have to first seek Astons source to inform me. The comprehensive study was so helpful in getting a whole understanding of the subject. Although, he did underestimate Pope Pius VIs influence in the break between the French Catholic Church, he did bring up elements not previously discussed. However he did have the benefit, of having publications such as Tacketts to elaborate upon, as well as John McManners short synthesis of 1968. From a non expert point of view this book was very readable, and had much detail and evidence to back conclusions. It explained the atmosphere before, during, and after the Civil Constitution which is useful in figuring out the implications of the Civil Constitution. However, I wouldnt use Van Kleys book again. It was least helpful in giving a whole explanation on the impact of the Civil Constitution on the French revolution. It was very one-sided, and the information was hard to understand. Only experts, with a firm knowledge on the religious influences of the Revolution would benefit from reading this source, as they would be able to understand his point of view. However, Van Kley must receive credit for being a pioneer in his subject. His work influenced many works that came after that had information on Jansenism. I just did not receive the full picture of the Civil Constitutions impact and how other denominations were concerned. More synthesis needs to be done on this topic to really get the full gist of the importance of the Civil Constitution of the Clergy. Van Kleys view should be incorporated with the main historical narrative of the impact of the Civil Constitution and not disregarded as Jansenism focused and therefore irrelevant. Also Pope Pius VIs influence needs to be studied. Instead of trying to argue the importance of one side of the debate, each aspect that had an impact needs to be dissected and expanded upon. More analysis of primary sources and empirical data will only be helpful to the subject. Reading these three books by Tackett, Van Kley, and Aston is a great start in understanding the impact of the Civil Constitution of the Clergy. Bibliography Aston, Nigel. Religion and Revolution in France, 1780-1804. Washington, DC: Catholic University of America Press, 2000. Perry, Jonathan. â€Å"The Civil Constitution of the Clergy.† Hanover Historical Texts Project. 2001. Nov 16 2009. . Tackett, Timothy. Religion, Revolution, and Regional Culture in Eighteenth-Century France: The Ecclesiastical Oath of 1791. Princeton: Princeton University Press, 1986. Van Kley, Dale. The Religious Origins of the French Revolution: From Calvin to the Civil Constitution, 1560-1791. New Haven: Yale University Press, 1996. [1] Perry, Jonathan. â€Å"The Civil Constitution of the Clergy.† Hanover Historical Texts Project. 2001. Nov 16 2009. . [2] Tackett, Timothy. Religion, Revolution, and Regional Culture in Eighteenth-Century France: The Ecclesiastical Oath of 1791. Princeton: Princeton University Press, 1986. pg. vx. [3] Van Kley, Dale. The Religious Origins of the French Revolution: From Calvin to the Civil Constitution, 1560-1791. New Haven: Yale University Press, 1996. pg. 362 [4] IBID. pg. 353 [5] Van Kley, Dale. The Religious Origins of the French Revolution: From Calvin to the Civil Constitution, 1560-1791. New Haven: Yale University Press, 1996. pg. 336. [6] Aston, Nigel. Religion and Revolution in France, 1780-1804. Washington, DC: Catholic University of America Press, 2000. pg. 48. [7] IBID. pg. 56. [8] IBID. pg. 161. [9] Aston, Nigel. Religion and Revolution in France, 1780-1804. Washington, DC: Catholic University of America Press, 2000. pg. 162. [10] IBID. pg. 194.

Aurora is a Typical Teenager in Among The Mourners Essay -- essays res

Aurora is a Typical Teenager in Among The Mourners In the classical short story 'Among the Mourners', written by Ellen Gilchrist, a thirteen year old female deals with 'difficult' times. Aurora, the protagonist, is an average teenager who is faced with emotions of mortification and lust. 'Among the Mourners' conveys Aurora's feelings through the wake her parents have at her house, her new boyfriend, Giorgio, and her parent's marriage. Many times Aurora seems to be being over-dramatic through actions towards her family and boyfriend. Also, Aurora has the predisposition to tell lies, extend the truth, or even make her own belief up about a particular event. Finally, like any adolescent boy or girl, Aurora is boy crazy. Therefore, Aurora is a typical teenager because she is over-dramatic, stretches the truth, and is boy crazy. Aurora tends to over dramatize a lot of events taking place. At the wake her father was holding because a close friend, Mr. Alter, had committed suicide, ?[Aurora] was mortified? (93) because ?there were cars parked all over the yard and police cars in the driveway? (93). One can say that under the circumstances it was expected for people to draw together, to pay reverence to a love one, but Aurora saw it as an inconvenience or an embarrassment. As well as when Mr. Seats, a close friend of Mr. Alter, came to stay, Aurora did not want to give up her room, she states ?I did not kill him. Why should I give up my room (94). Again, Aurora makes a big deal over giving up her room, in understandable circumstances. In addition, when she describes her new boyfriend, Giorgio, ?[he] speaks about fifteen languages and he is so good-looking [one] wouldn?t believe it? (93), her description goes a little too far, bec... ... ?Among the Mourners?, one can see Aurora acts as a typical teenager. She over dramatizes many events in her life, just as if the world is coming to an end. Likewise, Aurora stretches the truth to get what she wants or to possibly get attention. Still, she is boy crazy and curious of what the opposite sex has to offer with her relationship with Giorgio. Aurora is a typical teenager, just like any teenager in today?s times. Many teenagers tend to get embarrassed or become over-dramatic for attention. Also, telling lies to get what they want, because normally teenagers feel as if they are more responsible that what people give them. In Aurora?s case was she was Gifted and Talented. In short, teenagers today end up experimenting or even getting pregnant at a young age, therefore, it is not surprising for Aurora to be curious. Nonetheless, Aurora is a typical teenager.

Euphoria: Glengarry Glen Ross :: essays research papers fc

Euphoria   Ã‚  Ã‚  Ã‚  Ã‚  Glengarry Glen Ross is a movie based on the award winning play by David Mamet dealing with the corrupt world of real estate salesmen in hot pursuit of closing their next big deal in hopes of obtaining the American Dream. The desire for the next big lead or prospect as it is called in the real estate world causes the salesman to act out in a foolish and oftentimes violent manner. The behavior the salesmen demonstrate when a lead is unavailable can be compared to a crack head experiencing withdrawal symptoms. Both will deviate from what is socially acceptable behavior and become violent with actions or words, harm others or their property and cause them and others stress related illnesses.   Ã‚  Ã‚  Ã‚  Ã‚  Salesmen are put under tremendous amounts of stress by their bosses on a daily basis. The 3M meetings or â€Å"morning motivational meetings,† are designed to keep the salespeople alert, on their toes and ready to control the mind of any hot leads they might obtain that day. An example of this in the movie is when Dave Moss states, ‘â€Å"I’ve got 48 hours to make a lot of money,’† (Glengarry Glen Ross). You can almost feel the tension oozing from the desperate man’s voice as he speaks these words. This type of ultimatum will in effect cause the person to become anxious and panicked as they attempt to meet the deadline their boss has placed on them.   Ã‚  Ã‚  Ã‚  Ã‚  Psychological mind control is a way the bosses motivate their salespeople and this mind control has a trickle down effect. The salespeople then use the mind control technique they learn from their bosses on their clients as well. In the movie, Shelley Levine aka â€Å"The Machine,† illustrates the technique on a prospect: ‘â€Å"You gotta’ believe in yourself†¦If you see the opportunity then take it†¦ this is the now and this is that dream†Ã¢â‚¬ ¦ (Glengarry Glen Ross). Shelley Levine then proceeds to tell his client â€Å"‘Now I want you to sign†¦I sat for five minutes then I sat for twenty two minutes watching the clock on the wall†¦ I locked in on them and they finally signed’† (Glengarry Glen Ross). This hypnotic effect of mind control is hard to master; however, once the defense barriers are broken one can close many deals.   Ã‚  Ã‚  Ã‚  Ã‚  After many disappointing cold calls, meetings and drop bys one of the salesmen, Dave Moss, has an idea that he feels is sure to be the solution to all their troubles with the bad leads.

Army: Sociology and Team Leader

By Groves, Ian, L The importance of being on time and communication With leadership on the first level This paper will tell you why it is imperative to be timely and also to keep good communication with your leadership mainly at the first level. This paper is a result to not showing up on time to a formation, and failing to let someone know what was going on. So now this paper will explain the importance of the ways someone could prevent it from happening to them. Being late makes people look bad and reflects upon the people in charge of them.Leaders are in charge of making sure the people they are in charge of are doing the right thing at all times and keeping them squared away. It is very important and imperative that one be on time to formations, briefs and anything else they are scheduled to do that day because if someone misses a brief or meeting they could miss very important information, every mission has a starting point and if your higher-ups tell you that is when they want to get stuff started. If you’re late that could mean doing push-ups Also, if you’re too late for duty you’re considered AWOL (absent without leave).Usually one should try to be early because being early, is always better than being late, it also reflects positively on you as a person, on your team leader and anyone in charge of them because you are a reflection of your team leader and anything he teaches you. It makes you and them look and seem squared away and on their game and not a lazy unmotivated scum bag. So if you want to impress your upper chain of command it would be a good idea to be at least on time if not early. You’ll look good and impress people hopefully the right people.This paper will also tell you the importance and imperativeness of keeping good communication between you and your team leader at the first line level. â€Å"The purpose of communication is to create new or better awareness. Effective communication implies the clear expres sion of vision and values in order to more easily achieve your goals†, keeping a good communication with your team leader is kind of like being on time to a formation, you could miss important information that your team leader puts out, it could be vital information like when to show up for a formation or brief.All you had to do was contact your team leader before the formation time and tell him/her you were running late and none of this would have happened. You would still get in trouble for being late, but not to such a degree. Communication with leadership and being on time also goes further, even all the way to army values. â€Å"Army Values† is not merely a phrase for how members of the Army should act; they are who we are. We emulate the seven Army Values because they are the standard for behavior, not only in the Army, but in any ordered society†.Communication and loyalty is being faithful to your team leader and telling him what is going on. Trust and comm unication is like your team leader trusting you to communicate with him and you trusting that your team leader will communicate and get you all the information you need. On an important mission it is your duty to get important information to your team leader so that you can get a mission accomplished with as little or no casualties as possible. Respect and communication is having enough respect for your team leader to tell him what is going on because he wants to know what is going on and not telling him would be disrespectful.Well I feel I have got my point across with communication and the army values, there is timeliness and how it involves the army values, It is your duty to be on time because it could mean bad outcomes, imagine you were moving some medical supplies to people who needed it and you were too late. it could mean losing lives. Integrity and timeliness is having the integrity to tell your team leader if you’re running late and taking responsibility for being l ate. in this paper I have told you the importance of being on time and communication even at the lowest level.By telling you this information It should have helped in persuading you to be timely and communicate with others. in this paper there are quotes that have been cited for credibility. This is the importance of time management and communication mainly on the first line level. Communication is very important. Time management is very important. Always do the right thing Sources and citing’s . â€Å"The purpose of communication is to create new or better awareness. Effective communication implies the clear expression of vision and values in order to more easily achieve your goals† Pagonis, William G. lieutenant general â€Å"The Importance of Communication. †Ã‚  The Importance of Communication. Blackhawk Consulting Group, n. d. Web. 15 Sept. 2012. . . â€Å"Army Values† is not merely a phrase for how members of the Army should act; they are who we are. We emulate the seven Army Values because they are the standard for behavior, not only in the Army, but in any ordered society†. â€Å"TRADOC News Service. †Ã‚  TRADOC News Service. N. p. , 23 Mar. 2006. Web. 15 Sept. 2012 .

Evaluation of Maintenance Culture of Christian Cathedral Church Buildings

EVALUATION OF MAINTENANCE CULTURE OF CHRISTIAN CATHEDRAL CHURCH BUILDINGS BY OLAYINKA JOHN AJAYI NOVEMBER, 2012 ABSTRACT The study focused on maintenance culture of cathedral church buildings in Lagos Mainland Area of Lagos State Nigeria. It also assessed the operational state of these church buildings within the study area. In achieving these objectives, opinions of maintenance officers and users of selected cathedral church buildings were sampled through structured questionnaires. The data collected were analyzed using descriptive statistics, upon which 100 respondent were surveyed.The analysis revealed that the operational state of some of these church buildings as been average. Maintenance officers and users of the buildings both ranked insufficiency of fund for maintenance programme as second most significant factor among other factors responsible for poor maintenance management of these church buildings. Other factors found to be highly significant by the maintenance officers a re; cost of maintenance by the operatives. The study recommended proactive measures to reduce the occurrence of defects in the buildings elements and services.The church board of trustee is to provide adequate funding for the implementation of their maintenance programme. Building elements should be regularly inspected to ensure their functionality. CHAPTER ONE 1. 0INTRODUCTION 1. 1Background of the Study Introduction of Christianity in Nigeria metamorphosed through different phases since the early missionaries stepped feet on the Nigerian soil in the 16th century (Ajayi, 2005), and this has given rise into Christian religious institutional buildings as the Christians need a place called church as a building to worship.Hence, old religious institutional buildings are considered symbolically and emotionally significant by community members (Cohen and Jaeger, 2008 & Vangelova, 2005), and public perception endows our environments with cultural values and in turn the perception is d ictated by these values. Numerous researchers and critics in architectural theory and historic preservation looked at these shared values, that humans’ â€Å"psychological necessity† to maintain their memory creates the desire for historic preservation Woodcock (2002).Likewise, the researchers argue that the on-going course of history that contains each generation’s culture should be preserved as the public is concerned with the preservation of their memory that has been fashioned in the relationship with their environments (Brand, 2005 and Downing, 2000). Geva (2002) demonstrates that various building types religious, national, residential are a function of the interaction of cultural, regional climate conditions and architectural forms. Geva analyzed the degree of architectural modifications of single family houses and community churches.From research carried out by Geva (2002), people spent more money in maintaining their personal residential building than re ligious institutional buildings (church). Thus, churches as a building type are significant to the public as they serve primarily as cultural symbols (Cantacuzino, 2009 & Jaeger, 2005). Church Buildings play an important role in the City by providing venues for a range of activities and services aimed at encouraging community interaction and participation.Church Buildings are important assets which contribute to the physical, social and moral wellbeing of the community, society at large and the subsequent development of social capital and community strength Robert (2001). The provision of church buildings promote a sense of community identity and â€Å"sense of place†. At the same time, there are significant cost factors associated with the upkeep (maintaining) and ongoing maintenance of these building assets. Maintenance involves fixing any sort of mechanical, plumbing or electrical device etc should it become out of order or broken (known as repair, unscheduled or casua lty maintenance).It also includes performing routine actions which keep the building in a working order (known as scheduled maintenance) or prevents trouble from arising (preventive maintenance). Maintenance may be defined as, â€Å"All actions which have the objective of retaining or restoring an item in or to a state in which it can perform its required function. The actions include the combination of all technical and corresponding administrative, managerial, and supervision actions. † The former of these represents a closed loop supply chain and usually has the scope of maintenance, repair or overhaul of the building.The latter of the categorizations is an open loop supply chain and is typified by refurbishment and remanufacture. The main characteristic of the closed loop system is that the demand for a product is matched with the supply of a used product. Neglecting asset write-offs and exceptional activities the total population of the product between the customer and t he service provider remains constant. Generally speaking, there are three types of maintenance in use: Preventive maintenance, where equipment is maintained before break down occurs.This type of maintenance has many different variations and is subject of various researches to determine best and most efficient way to maintain equipment buildings inclusive. Recent studies have shown that Preventive maintenance is effective in preventing age related failures of the equipment. For random failure patterns which amount to 80% of the failure patterns, condition monitoring proves to be effective. Corrective maintenance, where equipment is maintained after break down.This maintenance is often most expensive because worn equipment can damage other parts and cause multiple damage. Reliability centered maintenance, often known as RCM, is a process to ensure that assets continue to do what their users require in their present operating context. All these shall be looked into in detailed the lite rature review In addition, the management and community at large has a significant duty of care to ensure that these buildings are kept and maintained appropriately to ensure the safety of all users and compliance with all legislative requirements and standards.While the requirements for good practice in maintenance management of buildings have been established over a considerable period, the achievement of good practice is by no means universal (Turrell, 2007). Furthermore, the maintenance of these religious institutional buildings has a significant impact on the environment and on the whole nation at large. Additionally, the conditions of the surroundings in which we live and learn, is a reflection of the nation’s well being (Lee, 2007). 1. 2Statement of the problemMost existing religious institutional buildings in Lagos State lack adequate maintenance attention and as result of this, these buildings are in very poor and deplorable conditions of structural and decorative di srepair Ogunlana (1999),. While considerable research have been carried out on factors responsible for the poor maintenance of these religious institutional buildings in Lagos State but only scant attention has been given to the key parameters affecting the implementation of maintenance programmes for these religious institutional buildings.There is therefore a need to establish and evaluate the factor affecting maintenance of these religious institutional buildings. 1. 3Aim and Objectives of the Study The aim of this study is to evaluate the maintenance culture of Christian institutional buildings in Lagos State. To achieve this aim, the following objectives are adopted. 1. To identify the maintenance problem of religious institutional buildings and provide solutions to the problem. 2. To examine the physical conditions of these religious institutional buildings so as to ascertain the level of their maintenance. . To examine the maintenance principle in use for Christian religious institutional buildings in Lagos state. 4. To evaluate the effect of maintenance on the performance of religious institutional buildings in Lagos State. 1. 4Significance of the Study The study will state how significant the maintenance of our religious institutional buildings is in social economic development of our country at large and the research finding will contribute to solving problems regarding maintenance culture of these institutional buildings.The findings of this study will contribute to the improvement of poor maintenance culture of these buildings and lukewarm attitude of maintenance managers in charge of these buildings. The result of the study will determine the quantity of maintainable items supplied to this building. The study will further educate maintenance manager of the building to broaden their horizon in planning day to day maintenance. Furthermore, the outcome of the study will create awareness in maintenance culture in relation to the basic demands of the d ifferent subject or maintenance areas. . 5Research Question In order to achieve the objectives of this study, the following questions have to be answered. 1. What are the maintenance problems facing these religious institutional buildings? 2. Are these religious institutional buildings in good physical condition? 3. What are the maintenance principles implore by the maintenance managers in maintaining these institutional buildings? 4. What are the effects of maintenance on the performance of these religious institutional buildings? 1. 6Scope and Limitation of the StudyThere is no doubt about the significance Christian Institutional buildings in Lagos State as they also serve as social and moral heritage and they must be maintained properly. Hence the scope of this study shall be limited to Cathederal Churches in Lagos Mainland of Lagos State. HAPTER TWO 2. 0REVIEW OF RELATED LITERATURE 2. 0Preamble Geva (2002) demonstrates that various building types religious, national, residential are a function of the interaction of cultural, regional climate conditions and architectural forms.Geva analyzed the degree of architectural modifications of single family houses and community churches. From research carried out by Geva (2002) that the people spent more money in maintaining their personal residential building than religious institutional buildings (church). Thus, churches as a building type are significant to the public as they serve primarily as cultural symbols (Cantacuzino, 2009 & Jaeger, 2005). 2. 1What is Maintenance? History is about the preservation of the past, so that a good use may be made of the future.Fifty years ago, the challenge was to get people to identify and care about institutional religious buildings while twenty-five years ago, the challenge was to avert development. Today, the challenge is to stop the unnecessary loss of historic religious institutional buildings through neglect, Onifade (2000). There are a substantial number of people wh o do not know the meaning of maintenance. At least the way they practice it would indicate this. In practice, prevalent interpretation of maintenance is to â€Å"fix† it when â€Å"it breaks†. This is a good definition for repair, but not true maintenance. This style of maintenance is reactive.Maintenance, according to Smith (2003) means to keep in its existing state, preserve, continue in good operating condition. Maintenance is defined as work undertaken in order to keep, restore or improve every facility, to an acceptable standard and to sustain the utility and value of the facility. This is a proactive maintenance. Historically in both the public sector and the private sector, maintenance was seen by many as an avoidable task which was perceived as adding little to the quality of the working environment, and expending scarce resources which could be better placed, Smiths (2008).To some maintenance is war. The enemies are the triumvirate of breakdown, deterioration, and all the types of unplanned events. The soldiers are the maintenance departments, in our organization and as many civilians as we can recruit. Military historians study battles with an eye towards identifying the pattern of conditions that dominated the outcome. As maintenance leaders, we have many strategies and weapons at our disposal, some new, some old, some complex and some simple, some defective as one theater of operations and some better in another.Each strategy to consider works only with the support of the correct weapons and the logistics. Institutional buildings, which form an integral part of the environment, are severely exposed to agencies such as moisture, intense solar radiation and prevailing winds, which directly change their physical attributes (Ikpo, 2006). The prime effects of these environmental agencies include discoloration, abrasion, cracks, stains and fungal growth. Therefore, regular or periodic maintenance is required to preserve the physical form of severely exposed religious institutional buildings, and landforms among others.Apart from exposure to weather, biochemical agencies also accelerate decay of institutional buildings. It has become factual that these physical and social changes have affected sites of cultural and historical importance. In the process, potential tourist sites of local and national interest comprising historical and peculiar architectural buildings, archaeological excavations, palaces, groves, monuments, open spaces and town squares are lost while some are wasting away. The issue is not that of causation of deterioration but of poor response to maintenance demands. 2. 2Maintenance of Institutional BuildingsReligious Institutional buildings today are confronted by unique challenges that threaten their very existence (Stolzenberg, 2004). The characteristics and the structure of these institutional buildings, by their nature lack the capacity to compete with the changing whether again. According to Shohet (2003), the performance of religious institutional buildings and their components depends to a large degree on continuous and planned periodical maintenance. The Built environment expresses in physical form the complex, social and economic factors, which give structure and life to a community (Lee, 2005).According to Banful (2004) the financial consequences of neglecting maintenance is often not only seen in terms of reduced asset life and premature replacement but also in increased operating cost and waste of related and natural and financial resources. Maintenance is related to the background of any project, unfortunately development plans and approved recurrent and capital estimates in religious institutional buildings in Lagos state have revealed that thought have not be given to maintenance work (Onifade, 2003). 2. Maintenance Problems of Religious Institutional Buildings There are so many problems being faced by attempts to maintain institutional buildings. Aradeon (2006) lis ted some of these problems to include inadequate professionals and the closeness of these sites to urban centres thereby making the land occupied by them to attract high value for alternative investment. The major problems confronting the maintenance of institutional buildings revealed by the study are related to finance basically. Repair cost of Religious institutional buildings is usually higher than a modern home.Some common maintenance needs seen in home are problems such as peeling paints and foundation cracks; minor structural problems such as crack plaster to small movement in the foundation; drainage and grading problems due to the installation of new roof gutter; insufficient electrical system; poorly installed plumbing; older leaking roof; older heating and cooling system; poor ventilation: excessive moisture from un-vented bathrooms and cooking areas causing damaged plaster and deteriorated windows; and excessive air leakage, Onifade (2006). 2. 3. 1Finance Maintenance is essential for the conservation of religious institutional buildings.Those who participate in the maintenance of religious institutional buildings like the church management committee need to know their likely financial commitment before work commences. This early-stage cost advice can establish realistic budget for decision making (Smith, 2005). The cost of maintenance of a religious institutional building could be high or lower depending on the structure at the beginning and invariably, it is usually high because of the materials that were used in the first place which may not meet current standard. It is therefore difficult for these properties to be maintaining properly (Mandal, 2004).The increasing abandonment of these properties by those who were originally responsible for them informed the need for government, NGOs and religious bodies’ participation in their maintenance. Finance is the major factor that inhibits the conservation of religious institutional buildings. Th e maintenance of institutional buildings requires a lot of money that cannot be provided by a single body. Other maintenance problems are; according to Adenuga (1999), various problems of varying magnitudes and origins are encountered in the process of maintenance. Some of these would include: 2. 3. Design Problems Some fundamental maintenance problems originate from the design of the building. These types of problems are usually hard to solve as it may involve complete reconstruction of the entire building or large section of it. It may be avoided or, at least, drastically reduced by involving at the design stages professional experts, including highly competent and experienced Maintenance Managers. 2. 3. 3Problem of Skill Some Maintenance Managers and their crew of craftsmen and technicians lack the desired skills (which include experience, technical know-how, etc) required on the job. . 3. 4Research and Development Problems There is lack of adequate funds and interest in this dir ection. In fact, research and development directed towards building maintenance is non-existent or at best, very minimal. 2. 3. 5Overcrowding Another characteristic common to most homes of poorer groups is crowded, cramped conditions. Many health problems affecting poorer groups are associated with overcrowding, including household accidents, acute respiratory infections (of which pneumonia is perhaps the most serious), tuberculosis and other airborne infections.In the predominantly low-income residential areas in Third World cities, there is often an average of four or more persons per room and in many instances less than one square metre of floorspace per person. Diseases such as tuberculosis, influenza and meningitis are easily transmitted from one person to another. Their spread is often aided by low resistance among inhabitants due to malnutrition and by frequent contact between infected and susceptible people. Acute bacterial and viral respiratory infections and lots of others are diseases caused by overcrowding Horner (2007). 2. 3. 6Indoor Air PollutionWhere open fires or relatively inefficient stoves are used indoors for cooking and/or heating, smoke or fumes from coal, wood or other biomass fuels can cause or contribute to serious respiratory problems. Chronic effects include inflammation of the respiratory tract which in turn reduces resistance to acute respiratory infections, while these infections in turn enhance susceptibility to the inflammatory effects of smoke and fumes. Exposure to carcinogens in emissions from biomass fuel combustion has been confirmed in studies in which exposed subjects wore personal monitoring equipment.Women who may spend 2-4 hours a day at the stove must be at risk. Infants and children may be heavily exposed because they remain with their mothers; the added exposure to pollutants combined with malnutrition may retard growth, leading to smaller lungs and greater prevalence of chronic bronchitis Harvey (2009) 2. 3. 7Disea se Vectors A large range of vectors live, breed or feed within or around houses and settlements. The diseases they cause or carry include some of the major causes of ill health and premature death in many cities – especially malaria (anopheles mosquitoes) and diarrhea diseases (cockroaches, blowflies and houseflies).But there are also many other diseases caused or carried by insects, spiders or mites including bancroftian filariasis (culex mosquitoes), Chagas disease (triatomine bugs), dengue fever (Ardes mosquitoes), hepatitis A (houseflies, cockroaches), leishmaniasis (sand-fly), plague (certain fleas), relapsing fever (body lice and soft ticks), scabies (scabies mites), trachoma (face flies), typhus (body lice and fleas), yaws (face flies), and yellow fever (Aegypti mosquitoes). Urban expansion may also change the local ecology in ways which favour the emergence or multiplication of particular disease vectors.For instance, Aedes aegypti, the mosquito vector for dengue feve r and yellow fever is often found to breed in polluted water sources such as soak-away pits and septic tanks. Anopheline mosquitoes generally shun polluted water but certain species have adapted to the urban environment and now breed in swamps and ditches in or close to urban areas Horner (2007). 2. 4Maintenance System The selection of maintenance system to be operated in the building should take into consideration in terms of the life cycle of the building materials, services installation provided space function or activities to be carried out in that particular building.In some cases, when the material has reached the ‘wear and tear’ condition, the maintenance work is then required to rectify those defects. Therefore, it is very important to ensure that the design team understands materials performance in order to reduce the running cost during building operation. Using so called ‘heavy duty’ materials and yet producing high quality building fabric, Arade on (2006). By knowing the physical and detail life span of the materials will allow the maintenance team to forecast the budget allocated for replacement work and planned the maintenance work as per schedule.With a detail record of the previous maintenance work, it will act as a benchmark to the future maintenance activities where decision be made through this. It shows that, the maintenance work should not only rectify and making good all defects at the affected area but also at the same time should be properly recorded. It is a way to closely monitor the severity of the defects occurring in the building; Arazi (2009). Referring to the previous record will assist the maintenance team to overcome and provide an effective remedial works.In spite of planned maintenance, emergency maintenance will involve urgent and immediate work prior to the problem. It is to avoid the resultant consequences to other activities which may cause severe failures; Oloyede (1991). By considering those pla nned and unplanned maintenance, the management should provide a realistic budget and come out with some emergency plans in dealing with uncertainties cases. Therefore, the implementation of an effective maintenance practice must inculcate some indicators to improvise the traditional maintenance management system to reach the needs and nature of the work. . 5Maintenance Needs and Nature It is highly desirable but hardly feasible to produce buildings that are maintenance-free, although much can be done at the design stage to reduce the amount of subsequent maintenance work. All elements of buildings deteriorate at a greater or lesser rate depending on material and methods of construction, environmental conditions and the use of the building. A prime aim of maintenance is to preserve a building in its initial stage, as far as practicable, so that it effectively serves its purpose. The main purposes of maintaining buildings are; Apwa (2001) i.Retaining value of investment. ii. Maintaini ng the building in a condition in which it continues to fulfill its function. iii. Presenting a good appearance. Maintenance work has also been categorized as â€Å"predictable† and â€Å"avoidable. Predictable maintenance is regularly periodic work that may be necessary to retain the performance characteristic of a product, as well as that required to replace or repair the product after it has achieved a useful life span. Avoidable maintenance is the work required to rectify failures caused by poor design, incorrect installation or the use of faulty materials.The function of maintenance can be divided into three (3) groups; * Cleaning and servicing, * Rectification and repair and * Replacement. Timely expenditure on the first two can postpone the need to replace materials or components, a very expensive business. Cleaning and servicing should be carried out regularly and may be combined with a system of reporting faults when become apparent, thereby avoiding the need for mo re expensive repairs or even replacement at a later stage. Apwa (2001) 2. 6Type of MaintenanceAccording to Avedesian (2006) maintenance can be divided into the following categories:- Breakdown maintenance: It means that people waits until equipment fails and repairs it. Such a thing could be used when the equipment failure does not significantly affect the operation or production or generate any significant loss other than repair cost. Planned maintenance: This is maintenance organized and carried out with forethought, control and the use of records to a predetermined plan, Unplanned maintenance Ad hoc maintenance carried out to no predetermined plan. Preventive maintenanceMaintenance carried out at predetermined intervals, or corresponding to prescribed criteria, and intended to reduce the probability of failure, or the performance degradation of an item. Preventive maintenance initiated as a result of knowledge of the condition of an item from routine or continuous monitoring. It is a daily maintenance (cleaning, inspection, oiling and re-tightening), design to retain the healthy condition of equipment and prevent failure through the prevention of deterioration, periodic inspection or equipment condition diagnosis, to measure deterioration.It is further divided into periodic maintenance and predictive maintenance. Just like human life is extended by preventive medicine, the equipment service life can be prolonged by doing preventive maintenance. | Preventive maintenance as scheduled overhaul or scheduled replacement provides two of the three proactive failure management policies available to the maintenance manager. Common methods of determining what Preventive (or other) failure management policies should be applied are; OEM ecommendations, requirements of codes and legislation within a jurisdiction, what an â€Å"expert† thinks ought to be done, or the maintenance that's already done to similar equipment, and most important measured values and perfo rmance indications. To make it simple: * Preventive maintenance is conducted to keep equipment working and/or extend the life of the equipment. * Corrective maintenance, sometimes called â€Å"repair,† is conducted to get equipment working again. 2. 7Goals of a Successful Maintenance Programme According to Iyagba R.O (2004) Successful maintenance programs should achieve these goals: 1. Help buildings function as they were intended and operate at peak efficiency, including minimizing energy consumption. Because maintenance keeps equipment functioning as designed, it reduces inefficiencies in operations and energy usage. 2. Failures of building systems that would interrupt occupants’ activities and the delivery of public services. Buildings that operate trouble-free allow public employees to do their jobs and serve the public.Because maintenance includes regular inspections and replacement of equipment crucial to operating a building, maintenance staff reduces the proble ms that might otherwise lead to a breakdown in operations. 3. Sustain a safe and healthful environment by keeping buildings and their components in good repair and structurally sound. Protecting the physical integrity of building components through preventive maintenance preserves a safe environment for employees and the public. 4. Provide maintenance in ways that are cost-effective.Preventive maintenance can prevent minor problems from escalating into major system and equipment failures that result in costly repairs. In avoiding costs of major repairs, preventive maintenance creates efficiencies. Increasing preventive maintenance can reduce time spent reacting to crises, which is a more cost-effective way to operate buildings. Deferring preventive maintenance can generate higher costs over the long term. 2. 8Building Performance This is a comprehensive whole house approach to identifying and fixing comfort and energy efficiently.Building performance or home performance is a compreh ensive whole-house approach to identifying and fixing comfort and energy efficiency problems in a home. Energy audits are performed by energy auditors, also known as building analysts or consultants, which, in the United States, are usually certified by the Building Performance Institute (BPI). The United States Environmental Protection Agency and Department of Energy started a national program â€Å"Home Performance with ENERGY STAR† to offer a comprehensive, whole-house approach to improving energy efficiency and comfort at home, while helping to protect the environment.The Home Performance with ENERGY STAR program has 40 programs, to date, across the country which are administered by various utilities and state energy offices. Home performance applies building science to address the following issues: Efficient energy use, Durability, Indoor Air Quality, Thermal Comfort, Indoor Moisture sources and solutions Diagnostic equipment includes: Blower door, Duct blaster, Thermogr aphic camera Combustion analyzer.A home performance energy audit results in home energy retrofit recommendations to improve the comfort and efficiency of the home, the most common of which include: Sealing air holes and gaps in the building envelope and subsequently adding insulation. Sealing ducts. Upgrading heating and cooling systems, appliances and lighting by replacing them with energy efficient equipment such as ENERGY STAR appliances or devices, compact fluorescent lamps, or LED lamps. Adding heat recovery ventilation or other means to control and upgrade fresh air ventilation, Retrieved from Google (2012). CHAPTER THREE RESEARCH METHODOLOGY PreambleThis chapter housed the method used in gathering the necessary information and source of data used on the research project. The study examines the techniques used in analyzing the data. This research is based on the evaluation of maintenance culture of Christian religious institutional buildings in Lagos State, Nigeria, and the fo llowing were looked into, research design, population, sampling technique, instrument for data collection, administration of instrument and technique of data analysis. Technique of Data Analysis The data collected was analyzed with simple percentage for respondents’ bio-data, Arithmetic mean for research.This was done in respects to the four points Likert scale, Analysis of Research Questions Research Question 1:what are the maintenance problems facing Christian institutional buildings? S/N| STATEMENT| SA| A| D| SD| X | Remarks | 1| The church building is in a detoration state| -| 3Ãâ€"39| 2Ãâ€"65130| 1Ãâ€"3232| 1. 71| Disagree| 2| The church building needs certain level of repair generally| -| 3Ãâ€"35105| 2Ãâ€"4590| 1Ãâ€"2020| 2. 15| Disagree | 3| Most of the roofing, paints and some parts of the church needs repair| 4Ãâ€"37148| 3Ãâ€"3399| 2Ãâ€"1530| 1Ãâ€"1515| 2. 5| Agree | Source; Field Survey, 2O12 From the table above, the respondents disagreed with statement o ne and statement two respectively with the mean score level of 1. 71 and 2. 15 respectively. But agree with the last statement to show the level of maintenance needed by these church buildings. From the analysis above we discovered that these church buildings are maintained but there are still levels of maintenance needed in the area of roofing due to wear and tear and moisture, which also is applicable to the church painting.Research Question 2: are these Christian institutional buildings in good physical conditions? S/N| STATEMENT| SA| A| D| SD| X | Remarks | 4| The building equipments has been audited several time to ascertain level of maintenance needs| 4Ãâ€"67268| 3Ãâ€"2369| 2Ãâ€"36| 1Ãâ€"77| 3. 50| Agree| 5| There are certain amounts allocated for the maintenance of this building by the authority. | 4Ãâ€"78312| 3Ãâ€"2266| -| -| 3. 78| Agree| 6| Periodic preventive maintenance is carried out on this church building| 4Ãâ€"85340| 3Ãâ€"1854| 2Ãâ€"510| -| 4. 4| Agree| Sour ce; Field Survey, 2O12 The table above shows that the respondents agreed with all of the statements made. The mean scores are 3. 50, 3. 78 and 4. 04 respectively which mean that the majority of the churches surveyed are kept under good conditions with amount allocated for maintenance and periodic preventive maintenance carried out. Research Question 3: what are the maintenance principles implore by the maintenance managers in maintaining these buildings? S/N| STATEMENT| SA| A| D| SD| X | Remarks | | There is a facility maintenance plan for this building| 4Ãâ€"55220| 3Ãâ€"45135| -| -| 3. 55| Agree| 8| The facility maintenance plan includes long and short term objectives and budgets? | 4Ãâ€"27108| 3Ãâ€"1545| 2Ãâ€"2448| 1Ãâ€"3434| 2. 35| Disagree| 9| The facility manager carry out preventive maintenance regularly| 4Ãâ€"85340| 3Ãâ€"1854| 2Ãâ€"510| -| 4. 04| Agree| Source; Field Survey, 2012 The table above shows that the respondents agreed with statements 7 and 9 with mean scor e of 3. 55 and 4. 04 respectively, thereby disagreeing with statement 8 made with mean score of 2. 5, which shows an indication that there is facility maintenance plans for all the church building and that there is preventive maintenance carried out by the manager, but there are no adequate budget to execute this maintenance plan. SUMMARY, CONCLUSIONS AND RECOMMENDATIONS Summary Maintenance is regarded to be the most pragmatic and philosophically appropriate conservation method (Forsyth, 2007). Regular maintenance is critical to the survival of any building, be it cultural, heritage or non-heritage and church buildings.This recognition was made as early as 1877 by William Morris the founder of the Society for the Protection of Ancient Buildings (SPAB), an organization entrusted with caring and preserving United Kingdom’s heritage buildings. He considered regular maintenance as â€Å"the most practical and economic form of conserving heritage buildings†. Kerr (2000) als o emphasized that â€Å"of all the processes of conserving ancient church buildings, maintenance is the single most important process†. To date, regular maintenance is still considered as the most sustainable way of preserving church buildings (Dan and Cantell, 2007).However, a large number of heritage buildings are decaying due to age, neglect, high maintenance cost and lack of comprehensive guidelines and understanding of heritage buildings’ maintenance management practices 5. 2Conclusion The study has revealed that the operational state (physical-functional condition) of church buildings in Lagos State as carried out by the maintenance department was found to be good, The analysis discloses that the Cathedral church buildings in Lagos State are in a good state of existence in terms of the physical and functional conditions of the building elements and services that constitute these buildings.But for better performance, a proactive rather than reactive approach shoul d be adopted for effective maintenance practices as some Cathedral church buildings out of the surveyed ones are not properly maintained. This study has raised awareness on the practice and cost of neglect of maintenance of our Cathedral Church buildings. It is not intended to frighten the church owner or user, it is to sound the alarm for the need of imbibing the culture of maintenance of our church buildings as opposed to the culture of lawlessness and arbitrariness that have characterized past management of our building stock.The research work is wake-up to arresting the menace and embarrassment of the Sick Building Syndrome. 5. 3Recommendations Cathedral church buildings are places of worship as such more has to be done by both the maintenance management staff and the users to improve the operational state (physical-functional condition) more in maintaining those which are not properly maintained as they are place which give moral lessons to the people. Recommendations for these churches cannot be over emphasized.Hence upon this the following recommendations are made to preserve these church buildings under survey. Maintenance managers and their team should adopt more proactive approach to reduce the occurrence of defects, which will consequently bring about better physical and functional Cathedral church buildings elements and services. The governing councils of these churches should always set aside adequate fund for the running of these Cathedral church buildings as the study shows that there are no long time budgets for these buildings.Maintenance managers should equally give the narrow managerial span of control a trial in use as this may likely bring about a more effective organizational structure leading to better maintenance management of public hospital buildings. It is also important that maintenance management work together with top administration management so as to secure sufficient funds for maintenance works as well as ensure that such funds is judiciously utilized. Maintenance manager should use authentic materials and skills in repairing and retrofitting these church buildings.Older buildings require constant maintenance. Current funding programs cover the initial conversion costs, but not longer-term maintenance. Perhaps additional funds for maintenance could be made available when conserving built heritage is part of a housing project’s objectives. Building managers should also * coordinate preventive maintenance with other maintenance projects, * prepare a checklist of preventive maintenance tasks, * schedule a timeline for the tasks, * prepare procedures for managing the program, and include preventive maintenance among activities for controlling the quality of air inside buildings As building managers determine what maintenance projects are needed, they should use an objective process for setting priorities among them. For cost effectiveness, building managers should calculate total costs over the expecte d lifetime of building and facilities. As a prelude to preventive maintenance, building managers should oversee periodic inspections of buildings’ conditions and create an inventory of buildings’ components and equipment.References Adenuga, O. A. (1999): Building maintenance in Nigeria: Structural Deterioration, Recognition Diagnosis of Causes and Remedies. (01), 5-25). Ajayi, L. A. (1987): Concern for collapse of building in Nigeria. Journal of the Nigerian Institute of Structural Engineers, 1(2). Akinsola, O. E. , Adenuga O. A. , and Iyagba R. O. (2004): Strategic maintenance practices: Effective loots for improved productivity and efficiency of plants and equipments in construction industry. Journal of Building Quarterly, 3(1), 10-15. Allen, D (2003), Facilities management, Bradford, Vol. 11, Iss 3, pg. 7. Association of School Business Officials (ASBO) International, School Facilities Maintenance and Operations Manual (Reston, VA: ASBO International, 2008). Avedesi an, (2006) How to Design and Manage Your Preventive Maintenance Program. APWA and Building Research Board of the National Research Council, Committing to the Cost of Ownership: Maintenance and Repair of Public Buildings (Chicago: APWA, 2001). Alexander, B. Atkin, J. Brochner, T. Haugen (2004), Facilities Management, Innovation and Performance. Barret, P. (2005), Facilities Management: Towards Best Practice, Oxford:Blackwell Science. British Standard Institution (1998): BS 79813: The principle of the Construction of Historic Buildings. BSI, London. Chanter, P. , Swallow B, (2000), Building Maintenance Management, Blackwell Science, Ltd. David G. Cotts, (2009). The Facility Management Handbook, 2d ed. (New York: American Management Association.